// CODE SNIPPET
1926.152(g) Service and Refueling Areas
JUMP TO FULL CODE CHAPTER
The dispensing hose shall be an approved type.
The dispensing nozzle shall be an approved automatic-closing type without a latch-open device.
Clearly identified and easily accessible switch(es) shall be provided at a location remote from dispensing devices to shut off the power to all dispensing devices in the event of an emergency.
Heating equipment of an approved type may be installed in the lubrication or service area where there is no dispensing or transferring of Category 1, 2, or 3 flammable liquids, provided the bottom of the heating unit is at least 18 inches above the floor and is protected from physical damage.
Heating equipment installed in lubrication or service areas, where Category 1, 2, or 3 flammable liquids are dispensed, shall be of an approved type for garages, and shall be installed at least 8 feet above the floor.
There shall be no smoking or open flames in the areas used for fueling, servicing fuel systems for internal combustion engines, receiving or dispensing of flammable liquids.
Conspicuous and legible signs prohibiting smoking shall be posted.
The motors of all equipment being fueled shall be shut off during the fueling operation.