UpCodes logo
Go To Full Code Chapter
The foam plastic insulation shall be separated from the plenum by a thermal barrier complying with Section 2603.4 and shall exhibit a flame spread index of 75 or less and a smoke-developed index of 450 or less when tested in accordance with ASTM E84 or UL 723 at the thickness and density intended for use.

Related Code Sections

2603.7.1 Plastic, Separation Required
The foam plastic insulation shall be separated from the plenum by a thermal barrier complying with Section 2603.4 and shall exhibit a flame spread ...
602.2.1.5.1 Duct Systems, Separation Required
The foam plastic insulation shall be separated from the plenum by a thermal barrier complying with Section 2603.4 of the International Building Code ...
602.2.1.6.1 Duct Systems, Separation Required
The foam plastic insulation shall be separated from the plenum by a thermal barrier complying with Section 2603.4 of the International Building Code ...
903.2.1 Alterations—Level 3, Separation Required
Where the work area is in any attached dwelling unit in Group R-3 or any multiple single-family dwelling (townhouse), walls separating the dwelling ...
1003.4 Traps, Interceptors and Separators, Oil Separators Required
emptying into the building drainage system or other point of disposal. Exception: An oil separator is not required in hydraulic elevator pits where ...