// CODE SNIPPET
AS105.6.8 Separation of Wood and Plaster
JUMP TO FULL CODE CHAPTER
Where wood framing or wood sheathing occurs on the exterior face of strawbale walls, such wood surfaces shall be separated from exterior plaster with two layers of Grade D paper, No. 15 asphalt felt or other approved material in accordance with Section R703.7.3.
Exceptions:
- Where the wood is preservative treated or naturally durable and is not greater than 11/2 inches (38 mm) in width.
- Clay plaster shall not be required to be separated from untreated wood that is not greater than 11/2 inches (38 mm) in width.
Related Code Sections
AS105.6.8 Strawbale Construction, Separation of Wood and Plaster
Where wood framing or wood sheathing occurs on the exterior face of strawbale walls, such wood surfaces shall be separated from exterior plaster ...
California Residential Code 2016 > S Strawbale Construction > AS105 Strawbale Walls—General > AS105.6 Moisture Control > AS105.6.8 Separation of Wood and Plaster
AS105.6.8 Strawbale Construction, Separation of Wood and Plaster
Where wood framing or wood sheathing occurs at the exterior face of strawbale walls, such wood surfaces shall be separated from exterior plaster ...
California Residential Code 2019 > S Strawbale Construction > AS105 Strawbale Walls—General > AS105.6 Moisture Control > AS105.6.8 Separation of Wood and Plaster
R703.7 Wall Covering, Exterior Plaster
, plaster application need be only two coats, provided the total thickness is as set forth in Table R702.1(1). On wood-frame construction with an on-grade ...
California Residential Code 2016 > 7 Wall Covering > R703 Exterior Covering > R703.7 Exterior Plaster
R703.7.2 Wall Covering, Plaster
, provided the total thickness is as set forth in Table R702.1(1). On wood-frame construction with an on-grade floor slab system, exterior plaster shall ...
California Residential Code 2019 > 7 Wall Covering > R703 Exterior Covering > R703.7 Exterior Plaster (Stucco) > R703.7.2 Plaster