// CODE SNIPPET
1008.2.3 Sensors and Controls
Go To Full Code Chapter
Automatic, occupant sensor or photosensor lighting controls shall be permitted within means of egress, provided that the illumination level is not reduced to a level below the minimum requirements of Section 1008.2.1, and the switch controllers are equipped for fail-safe operation ensuring that if the sensor or control fails, the lighting levels will be at the levels required by Section 1008.2.1.
Upcodes Diagrams
Related Code Sections
1006.2.1 Means of Egress, Sensors and Controls
Automatic, occupant sensor or photosensor lighting controls shall be permitted within means of egress, provided that the illumination level ...
1006.2.1 Means of Egress, Sensors and Controls
Automatic, occupant sensor or photosensor lighting controls shall be permitted within means of egress, provided that the illumination level ...
1008.2.3 Means of Egress, Sensors and Controls
Automatic, occupant sensor or photosensor lighting controls shall be permitted within means of egress, provided that the illumination level ...
24.13.1.7 Emergency Communications Systems (ECS),
The emergency command center operator shall have the ability to monitor inputs/sensors and control output devices automatically, manually ...
3.3.259 Definitions, Single-Station Alarm
A detector comprising an assembly that incorporates a sensor, control components, and an alarm notification appliance in one unit operated from ...