// CODE SNIPPET
JUMP TO FULL CODE CHAPTER
Smoke detectors shall be marked with their nominal production sensitivity and tolerance in percent per foot (percent per meter) obscuration, as required by the listing.
Spot-type smoke detectors that have provision for field adjustment of sensitivity via a mechanical means shall have an adjustment range of not less than 0.6 percent per foot (1.95 percent per meter) obscuration.
Related Code Sections
17.7.2* Initiating Devices, Sensitivity
Smoke detectors shall be marked with their nominal production sensitivity and tolerance in percent per foot (percent per meter) obscuration ...
National Fire Alarm and Signaling Code 2019 of Maine > 17 Initiating Devices > 17.7 Smoke-Sensing Fire Detectors > 17.7.2* Sensitivity
18.104.22.168 Definitions, Sensitivity Analysis
An analysis performed to determine the degree to which a predicted output will vary given a specified change in an input parameter, usually ...
Life Safety Code 2018 of Maine > 3 Definitions > 3.3 General Definitions > 3.3.17 Analysis > 22.214.171.124 Sensitivity Analysis
3.4.19 Definitions, Sensitivity Analysis
See 126.96.36.199 ...
Fire Code 2018 of Maine > 3 Definitions > 3.4 Special Performance-Based Definitions > 3.4.19 Sensitivity Analysis
8.3.3 Installation Requirements, Thermal Sensitivity
Sprinklers in light hazard occupancies shall be one of the following: Quick-response type as defined in 188.8.131.52 Residential sprinklers ...
Standard for the Installation of Sprinkler Systems 2016 of Maine > 8 Installation Requirements > 8.3 Use of Sprinklers > 8.3.3 Thermal Sensitivity
3.10.4* Definitions, Heat-Sensitive Material
A material whose melting point is below 1700°F (927°C ...
Standard for the Installation of Sprinkler Systems 2016 of Maine > 3 Definitions > 3.10 Marine Definitions > 3.10.4* Heat-Sensitive Material