// CODE SNIPPET
1910.109(a)(12) Semiconductive Hose
Go To Full Code Chapter
Semiconductive hose - a hose with an electrical resistance high enough to limit flow of stray electric currents to safe levels, yet not so high as to prevent drainage of static electric charges to ground; hose of not more than 2 megohms resistance over its entire length and of not less than 5,000 ohms per foot meets the requirement.
Upcodes Diagrams
Related Code Sections
1910.109(a)(12) Hazardous Materials, Semiconductive Hose
Semiconductive hose - a hose with an electrical resistance high enough to limit flow of stray electric currents to safe levels, yet not so high ...
1910.308(a)(3)(ii) Electrical,
Metallic shielding components such as tapes, wires, or braids, or combinations thereof, and their associated conducting and semiconducting components ...
1910.158(c)(3) Fire Protection, Hose
The employer shall assure that every 1 1/2 inch (3.8 cm) or smaller hose outlet used to meet this standard is equipped with hose connected and ready ...
1910.253(e)(5) Welding, Cutting, and Brazing, Hose and Hose Connections
Hose for oxy-fuel gas service shall comply with the Specification for Rubber Welding Hose, 1958, Compressed Gas Association and Rubber Manufacturers ...
1910.106(f)(4)(vii) Hazardous Materials, Hoses and Couplings
All pressure hoses and couplings shall be inspected at intervals appropriate to the service. The hose and couplings shall be tested with the hose ...