// CODE SNIPPET
A206.1.1 Seismicity Parameters, Site Class and Geologic Hazards
Go To Full Code Chapter
For any site designated as Site Class E, the value of Fa shall be taken as 1.2. Site-specific procedures are not required for compliance with this chapter. Mitigation of existing geologic site hazards such as liquefiable soil, fault rupture or landslide is not required for compliance with this chapter.
Related Code Sections
A206.1.1 Guidelines for the Seismic Retrofit of Existing Buildings, Seismicity Parameters, Site Class and Geologic Hazards
with this chapter. Mitigation of existing geologic site hazards such as liquefiable soil, fault rupture or landslide is not required for compliance ...
A403.3.2 Guidelines for the Seismic Retrofit of Existing Buildings, Seismicity Parameters, Site Class and Geologic Hazards
with this chapter. Mitigation of existing geologic site hazards such as liquefiable soil, fault rupture or landslide is not required for compliance ...
1603.1.5 Structural Design, Earthquake Design Data
-resisting system of the structure:
Risk category.
Seismic importance factor, Ie.
Mapped spectral response acceleration parameters, SS and S1.
Site ...
1603.1.5 Structural Design, Earthquake Design Data
-resisting system of the structure:
Risk category.
Seismic importance factor, Ie.
Mapped spectral response acceleration parameters, SS and S1.
Site ...
1613.2 Structural Design, Seismic Ground Motion Values
be classified as Site Class A, B, C, D, E or F in accordance with Chapter 20 of ASCE 7. Where the soil properties are not known in sufficient detail ...