// CODE SNIPPET
1616.2.3 Seismic Use Group III
Go To Full Code Chapter
Seismic Use Group III structures are those having essential facilities that are required for post earthquake recovery and those containing substantial quantities of hazardous substances, as indicated in Table 1604.5, or as designated by the commissioner. Where operational access to a Seismic Use Group III structure is required through an adjacent structure, the adjacent structure shall conform to the requirements for Seismic Use Group III structures. Where operational access is less than 10 feet (3048 mm) from an interior lot line or less than 10 feet (3048 mm) from another structure, access protection from potential falling debris shall be provided by the owner of the Seismic Use Group III structure.
Upcodes Diagrams
Related Code Sections
1616.2.3 Structural Design, Seismic Use Group III
Seismic Use Group III structures are those having essential facilities that are required for post earthquake recovery and those containing ...
1604.5 Structural Design, Structural Occupancy Category and Importance Factors
and II are considered Seismic Use Group I, Structural Occupancy Category III is considered Seismic Use Group II and Structural Occupancy Category IV ...
1622.1.3 Structural Design, ASCE 7, Section 9.14.7.9
structures such as tanks, tunnels and pipes. Buried structures that are designated as Seismic Use Group II or III, as determined in Section 9.1.3 ...
2308.2 Wood, Limitations
Group III, as determined in Section 1616. 7. Conventional light-frame construction is limited in irregular structures in Seismic Design ...
1622.1 Structural Design, Nonbuilding Structures
such as tanks, tunnels and pipes. Buried structures that are designated as Seismic Use Group II or III, as determined in Section 9.1.3 ...