UpCodes logo
Jump To Full Code Chapter
Seismic switches in accordance with Section 8.4.10 of ASME A17.1 shall be deemed to comply with Section 13.6.10.3 of ASCE 7.

Related Code Sections

1613.6.5 Structural Design, Seismic Controls for Elevators
Seismic switches in accordance with Section 8.4.10 of ASME A17.1 shall be deemed to comply with Section 13.6.10.3 of ASCE 7 ...
8.5.4 General Requirements, Seismic Detection Devices
and moving walk driving-machine motor(s) and brake(s) on all units controlled by the seismic detection device. (c) Where a seismic detection device ...
8.4.10 General Requirements, Emergency Operation and Signaling Devices
of the device shall be 1 Hz to 10 Hz. (c) The seismic detection device shall be mounted in an elevator machine room, control room, machinery space, control ...
8.4.15 General Requirements, Component Operating Weight, Wp
weight, in newtons (pounds), will be used (i.e., counterweight, controller, etc.) (b) for support or restraint of an elevator, the component operating ...