// CODE SNIPPET
(E) Secondary Connections
JUMP TO FULL CODE CHAPTER
Secondary circuit outputs shall not be connected in parallel or in series.
Related Code Sections
(D) Equipment for General Use, Secondary Connections
Secondary circuit outputs shall not be connected in parallel or in series ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.143 Transformers > (D) Secondary Connections
(E) Special Equipment, Secondary Connections
Secondary circuit outputs shall not be connected in parallel or in series ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 600 Electric Signs and Outline Lighting > 600.23 Transformers and Electronic Power Supplies > (E) Secondary Connections
(B) Equipment for General Use, Overcurrent Protection for Secondary Connections
shall be provided in the secondary connections of each transformer supplying the tie system. In addition, an automatic circuit breaker actuated ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 450 Transformers and Transformer Vaults (Including Secondary Ties) > 450.6 Secondary Ties > (B) Overcurrent Protection for Secondary Connections
250.170 Wiring and Protection, Instrument Transformer Circuits
Secondary circuits of current and potential instrument transformers shall be grounded where the primary windings are connected to circuits of 300 ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.170 Instrument Transformer Circuits
427.27 Equipment for General Use, Voltage Limitations
The secondary winding of the isolation transformer connected to the pipeline or vessel being heated shall not have an output voltage greater than 30 ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 427 Fixed Electric Heating Equipment for Pipelines and Vessels > 427.27 Voltage Limitations