UpCodes logo
Go To Full Code Chapter
Internal hood joints, seams, filter support frames, and appurtenances attached inside the hood shall be sealed or otherwise made greasetight. [NFPA 96:5.1.4]

Related Code Sections

1107.1.6 Refrigeration, Sealing
All pipes piercing the interior walls, ceiling, or floor of such rooms shall be tightly sealed to the walls, ceiling, or floor through which ...
(A) Wiring Methods and Materials, Sealing
material to prevent the circulation of warm air to a colder section of the raceway or sleeve. An explosionproof seal shall not be required ...
504.70 Special Occupancies, Sealing
Conduits and cables that are required to be sealed by 501.15, 502.15, 505.16, and 506.16 shall be sealed to minimize the passage of gases, vapors ...
506.16 Special Occupancies, Sealing
Where necessary to protect the ingress of combustible dust or ignitible fibers/flyings, or to maintain the type of protection, seals shall ...