// CODE SNIPPET
1910.216(b)(1)(ii) Safety Triprod
Go To Full Code Chapter
Installed in the front and in the back of each mill and located within 2 inches of a vertical plane tangent to the front and rear rolls. The top rods shall be not more than 72 inches above the level on which the operator stands. The triprods shall be accessible and shall operate readily whether the rods are pushed or pulled.
Upcodes Diagrams
Related Code Sections
1910.216(b)(1)(ii) Machinery and Machine Guarding, Safety Triprod
shall be not more than 72 inches above the level on which the operator stands. The triprods shall be accessible and shall operate readily whether ...
1910.110(b)(10) Hazardous Materials, Safety Devices
be provided with one or more safety relief valves of spring-loaded or equivalent type. These valves shall be arranged to afford free vent to the outer ...
1910.110(c)(7) Hazardous Materials, Safety Devices
Containers shall be provided with safety devices as required by DOT regulations ...
1910.110(d)(4) Hazardous Materials, Safety Devices
All safety devices shall comply with the following ...
1910.110(e)(7) Hazardous Materials, Safety Devices
Spring-loaded internal type safety relief valves shall be used on all motor fuel containers ...