// CODE SNIPPET
1910.217(h)(8) Safety System
Go To Full Code Chapter
1910.217(h)(8)(i)
Mechanical power presses used in the PSDI mode shall be operated under the control of a safety system which, in addition to meeting the applicable requirements of paragraphs (b)(13) and (c)(5) and other applicable provisions of this section, shall function such that a single failure or single operating error shall not cause injury to personnel from point of operation hazards.
1910.217(h)(8)(ii)
The safety system shall be designed, constructed, and arranged as an integral total system, including all elements of the press, the controls, the safeguarding and any required supplemental safeguarding, and their interfaces with the operator and that part of the environment which has effect on the protection against point of operation hazards.
Upcodes Diagrams
Related Code Sections
1910.211(d)(62) Machinery and Machine Guarding, Safety System
Safety system means the integrated total system, including the pertinent elements of the press, the controls, the safeguarding and any required ...
1910.217(h)(8) Machinery and Machine Guarding, Safety System
Mechanical power presses used in the PSDI mode shall be operated under the control of a safety system which, in addition to meeting the applicable ...
1910.29(i) Walking-Working Surfaces, Ladder Safety Systems
; and Ladder safety systems and their support systems are capable of withstanding, without failure, a drop test consisting of an 18-inch ...
1910.28(b)(9) Walking-Working Surfaces, Fixed Ladders (That Extend More Than 24 Feet (7.3 m) Above a Lower Level)
system, ladder safety system, cage, or well; Each fixed ...