// CODE SNIPPET
1910.262(bb)(2) Safety Stop Bar
Go To Full Code Chapter
A safety trip rod, cable or wire center cord shall be provided across the front and back of all rope washers extending the length of the face of the washer. It shall operate readily whether pushed or pulled. This safety trip shall be not more than 72 inches above the level on which the operator stands and shall be readily accessible.
Upcodes Diagrams
Related Code Sections
1910.262(bb)(2) Special Industries, Safety Stop Bar
A safety trip rod, cable or wire center cord shall be provided across the front and back of all rope washers extending the length of the face ...
1910.144(a)(1)(iii) General Environmental Controls, Stop
Emergency stop bars on hazardous machines such as rubber mills, wire blocks, flat work ironers, etc., shall be red. Stop buttons or electrical ...
1910.263(h)(2) Special Industries, Emergency Stop Bar
An emergency stop bar shall be provided, and so located that the body of the operator will press against the bar if the operator slips and falls ...
1910.265(e)(4)(iii) Special Industries, Safety Stops
Automatic trimmer saws shall be provided with safety stops or hangers to prevent saws from dropping on table ...
1910.217(d)(9) Machinery and Machine Guarding, Diesetting
The employer shall provide die stops or other means to prevent losing control ...