// CODE SNIPPET
1910.301(d) Safety Requirements for Special Equipment
Related Code Sections
1910.301(d) Electrical, Safety Requirements for Special Equipment
These regulations will be contained in 1910.381 through 1910.398 ...
OSHA 1910 General Industry > S Electrical > 1910.301 Introduction > 1910.301(d) Safety Requirements for Special Equipment
1910.269(u)(6) Special Industries, Substation Entry
information on special system conditions affecting employee safety, including the location of energized equipment in or adjacent to the work area ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(u) Substations > 1910.269(u)(6) Substation Entry
1910.217(h)(12)(iii) Machinery and Machine Guarding,
(if the press is equipped with a counterbalance) shall be checked and maintained by authorized persons whose qualifications include knowledge of the safety ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(h) Presence Sensing Device Initiation (PSDI) > 1910.217(h)(12) Die Setting and Work Set-Up > 1910.217(h)(12)(iii)
1910.103(c)(1)(iv) Hazardous Materials, Safety Relief Devices
of Transportation Regulations shall be equipped with safety relief devices as required in the U.S. Department of Transportation Specifications ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.103 Hydrogen > 1910.103(c) Liquefied Hydrogen Systems > 1910.103(c)(1) Design > 1910.103(c)(1)(iv) Safety Relief Devices
1910.263(l)(9) Special Industries, General Requirements
Where gas or electric ignition is used, the safety shutoff valve shall close in case of ignition failure. On burners equipped ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(l) Ovens > 1910.263(l)(9) General Requirements