// CODE SNIPPET
1910.255(c)(2) Safety Chains
Go To Full Code Chapter
All portable welding guns, transformers and related equipment that is suspended from overhead structures, eye beams, trolleys, etc. shall be equipped with safety chains or cables. Safety chains or cables shall be capable of supporting the total shock load in the event of failure of any component of the supporting system.
Upcodes Diagrams
Related Code Sections
1910.255(c)(2) Welding, Cutting, and Brazing, Safety Chains
with safety chains or cables. Safety chains or cables shall be capable of supporting the total shock load in the event of failure of any component ...
1910.111(f)(7)(i) Hazardous Materials,
All full trailers shall be firmly and securely attached to the vehicle drawing them by means of suitable drawbars supplemented by a safety chain ...
1910.213(l)(4)(iii) Machinery and Machine Guarding,
Where the counterweight does not encircle the bar, a safety chain shall be attached to it; ...
1910.265(d)(4)(ii) Special Industries, Elevating Ramp
If an elevating ramp or gate is used, it shall be provided with a safety chain, hook, or other means of suspension while employees are underneath ...
1910.213(g)(2) Machinery and Machine Guarding,
through both the bar and counterweight, or a bolt put through the extreme end of the bar, or, where the counterweight does not encircle the bar, a safety ...