// CODE SNIPPET
1910.263(l)(3) Safeguards of Mechanical Parts
Go To Full Code Chapter
1910.263(l)(3)(i)
Emergency stop buttons shall be provided on mechanical ovens near the point where operators are stationed.
1910.263(l)(3)(iii)
Main shutoff valves, operable separately from any automatic valve, shall be provided to permit turning off the fuel or steam in case of an emergency.
1910.263(l)(3)(iii)(a)
Main shutoff valves shall be located so that explosions, fires, etc. will not prevent access to these valves.
1910.263(l)(3)(iii)(b)
Main shutoff valves shall be locked in the closed position when men must enter the oven or when the oven is not in service.
1910.263(l)(3)(ii)
All piping at ovens shall be tested to be gastight.
Upcodes Diagrams
Related Code Sections
1910.263(l)(3) Special Industries, Safeguards of Mechanical Parts
Emergency stop buttons shall be provided on mechanical ovens near the point where operators are stationed ...
1910.217(e)(1)(i)(A) Machinery and Machine Guarding,
Conduct periodic and regular inspections of each power press to ensure that all of its parts, auxiliary equipment, and safeguards, including ...
1910.217(e)(1)(i) Machinery and Machine Guarding,
, and safeguards, including the clutch/brake mechanism, antirepeat feature, and single-stroke mechanism, are in a safe operating condition and adjustment ...
1910.264(d)(2) Special Industries, Mechanical
safeguard, safety appliance, or device attached to, or forming an integral part of any ...
1910.217(c) Machinery and Machine Guarding, Safeguarding the Point of Operation
of operation devices on every operation performed on a mechanical power press. See Table O-10.
Table O-10
[In inches ...