// CODE SNIPPET
1910.28(b)(5) Runways and Similar Walkways
Go To Full Code Chapter
1910.28(b)(5)(i)
The employer must ensure each employee on a runway or similar walkway is protected from falling 4 feet (1.2 m) or more to a lower level by a guardrail system.
1910.28(b)(5)(ii)
When the employer can demonstrate that it is not feasible to have guardrails on both sides of a runway used exclusively for a special purpose, the employer may omit the guardrail on one side of the runway, provided the employer ensures:
1910.28(b)(5)(ii)(A)
The runway is at least 18 inches (46 cm) wide; and
1910.28(b)(5)(ii)(B)
Each employee is provided with and uses a personal fall arrest system or travel restraint system.
Upcodes Diagrams
Related Code Sections
1910.28(b)(5) Walking-Working Surfaces, Runways and Similar Walkways
The employer must ensure each employee on a runway or similar walkway is protected from falling 4 feet (1.2 m) or more to a lower level ...
1910.179(a)(53) Materials Handling and Storage, Runway
Runway means an assembly of rails, beams, girders, brackets, and framework on which the crane or trolley travels ...
1910.265(c)(29)(ii) Special Industries, Runway
The conveyor runway to the burner shall be equipped with a standard handrail. If the runway crosses a roadway or thoroughfare, standard toe boards ...
1910.28(b) Walking-Working Surfaces, Protection From Fall Hazards
must ensure each employee on a runway or similar walkway is protected from falling 4 feet (1.2 m) or more to a lower level by a guardrail system ...
1910.179(a)(28) Materials Handling and Storage, Conductors, Runway
Conductors, runway (main) are the electrical conductors located along a crane runway to provide power to the crane ...