// CODE SNIPPET
A-901.8 Rough-In Permits
JUMP TO FULL CODE CHAPTER
The Department is authorized to issue permits for the rough-in of various utility systems, service systems and other building systems or elements as authorized by the Department from time to time, where such work is applied for in advance of the application for the complete system or element installation. Each type of system or element shall be applied for separately and shall require a permit fee of $150.
Related Code Sections
A-302.2.4 Permits, Rough-In Permits
A rough-in permit shall become invalid if the work is not initiated and the associated complete permit is not obtained within 60 days of issuance ...
Philadelphia Administrative Code > 3 Permits > A-302 Permits > A-302.2 Suspension of Permit > A-302.2.4 Rough-In Permits
A-901.8 Fees, Rough-In Permits
The Department is authorized to issue permits for the rough-in of various utility systems, service systems and other building systems or elements ...
2303.1.1.1 Wood, Certificate of Inspection
meeting the requirements of this section is permitted to be accepted for precut, remanufactured or rough-sawn lumber and for sizes larger than 3 inches (76 ...
2018 Philadelphia Building Code > 23 Wood > 2303 Minimum Standards and Quality > 2303.1 General > 2303.1.1 Sawn Lumber > 2303.1.1.1 Certificate of Inspection
R105.2.2 [RE] Scope and Administration, Framing and Rough-In Inspection
Inspections at framing and rough-in shall be made before application of interior finish and shall verify compliance with the code as to: types ...
2018 Philadelphia Energy Conservation Code > 1 [RE] Scope and Administration > R105 Inspections > R105.2 Required Inspections > R105.2.2 Framing and Rough-In Inspection
P2503.5.1 Plumbing Administration, Rough Plumbing
DWV systems shall be tested on completion of the rough piping installation by water or, for piping systems other than plastic, by air, without ...
2018 Philadelphia Residential Code > 25 Plumbing Administration > P2503 Inspection and Tests > P2503.5 Drain, Waste and Vent Systems Testing > P2503.5.1 Rough Plumbing