// CODE SNIPPET
1910.262(bb) Rope Washers
Go To Full Code Chapter
—
1910.262(bb)(1) Splash Guard
Splash guards shall be installed on all rope washers unless the machine is so designed as to prevent the water or liquid from splashing the operator, the floor, or working surface.
1910.262(bb)(2) Safety Stop Bar
A safety trip rod, cable or wire center cord shall be provided across the front and back of all rope washers extending the length of the face of the washer. It shall operate readily whether pushed or pulled. This safety trip shall be not more than 72 inches above the level on which the operator stands and shall be readily accessible.
Upcodes Diagrams
Related Code Sections
1910.262(bb) Special Industries, Rope Washers
across the front and back of all rope washers extending the length of the face of the washer. It shall operate readily whether pushed or pulled. This ...
1910.179(a)(51) Materials Handling and Storage, Rope
Rope refers to wire rope, unless otherwise specified ...
1910.180(a)(34) Materials Handling and Storage, Rope
Rope refers to a wire rope unless otherwise specified ...
1910.181(a)(28) Materials Handling and Storage, Rope
Rope refers to wire rope unless otherwise specified ...
1910.269(r)(7) Special Industries, Rope
Climbing ropes shall be used by employees working aloft in trees. These ropes shall have a minimum diameter of 12 millimeters (0.5 inch ...