// CODE SNIPPET
605.2 Rope and Float Line
Go To Full Code Chapter
A rope and float line shall be provided for all of the following situations:
- Separation of activity areas.
- Identification of a break in floor slope at water depths of less than 5 feet (1524 mm).
- Identification of a water depth greater than 41/2 feet (1372 mm) in constant floor slope in Class D-2 pools.
Exception: Class D-1 pools or any other pool where the designer indicates that such a line is not required or that the line would constitute a hazard.
605.2.1 Location
The rope and float line shall be located 1 foot (305 mm) toward the shallow end in each location.
Upcodes Diagrams
Related Code Sections
605.2 Aquatic Recreation Facilities, Rope and Float Line
A rope and float line shall be provided for all of the following situations: Separation of activity areas. Identification of a break in floor ...
603.3 Aquatic Recreation Facilities, Shallow-to-Deep-End Rope and Float Line
Where a pool has a water depth ranging from less than 5 feet (1524 mm) to greater than 5 feet (1524 mm), a rope and float line shall be located 1 ...
Section 603 Aquatic Recreation Facilities, Markings and Indicators
), a rope and float line shall be located 1 foot (305 mm) horizontally from the 5-foot (1524 mm) depth location, toward the shallow end of the pool ...
811.1 Permanent Inground Residential Swimming Pools, Rope and Float
In pools where the point of first slope break occurs, a rope and float assembly shall be installed across the width of the pool. The rope assembly ...
2508.3.1 Gypsum Board, Gypsum Panel Products and Plaster, Floating Angles
, and at the wall line are permitted to be omitted except on shear resisting elements or fire-resistance-rated assemblies. Fasteners shall be applied ...