// CODE SNIPPET
304.7 Roofs and Drainage
Go To Full Code Chapter
The roof and flashing shall be sound, tight and not have defects that admit rain. Roof drainage shall be adequate to prevent dampness or deterioration in the walls or interior portion of the structure. Roof drains, gutters and downspouts shall be maintained in good repair and free from obstructions. Roof water shall not be discharged in a manner that creates a public nuisance.
Upcodes Diagrams
Related Code Sections
304.7 General Requirements, Roofs and Drainage
The roof and flashing shall be sound, tight and not have defects that admit rain. Roof drainage shall be adequate to prevent dampness ...
304.7 General Requirements, Roofs and Drainage
The roof and flashing shall be sound, tight and not have defects that admit rain. Roof drainage shall be adequate to prevent dampness ...
Section 1502 Roof Assemblies and Rooftop Structures, Roof Drainage
Design and installation of roof drainage systems shall comply with Section 1502 of this code and Sections 1106 and 1108, as applicable ...
1503.4 Roof Assemblies and Rooftop Structures, Roof Drainage
Design and installation of roof drainage systems shall comply with Section 1503 of this code and Sections 1106 and 1108, as applicable ...
R801.3 Roof-Ceiling Construction, Roof Drainage
that will collect and discharge roof drainage to the ground surface not less than 5 feet (1524 mm) from foundation walls or to an approved drainage ...