• Codes
  • Features
  • Pricing
  • Login
  • Sign Up
Sign Up
Login
  • Code Library
  • Features
  • Pricing
  • About
  • Careers
  • Contact
  • Terms
  • Privacy
Sign Up
Upgrade to premium.
Simplify code analysis.


START 2 WEEK FREE TRIAL LEARN ABOUT PREMIUM
// CODE SNIPPET

303.11 Roofing Operations

NYC Fire Code 2014 > 3 General Precautions Against Fire > 303 Tar Kettles and Asphalt Melters > 303.11 Roofing Operations
JUMP TO FULL CODE CHAPTER
Roofing operations, including repairs, using open-flame devices shall comply with the requirements of FC1417 and FC Chapters 26 and 35.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.


Copy Section Text

Copy with citation
P Premium Feature

This feature is included in premium subscriptions only. Click below to start a free trial.

Start Free Trial

Related Code Sections


512.4 Exhaust Systems, Termination
Subslab soil exhaust system ducts shall extend through the roof and terminate at least 6 inches (152 mm) above the roof and at least 10 feet (3048 mm ...
NYC Mechanical Code 2008 > 5 Exhaust Systems > 512 Subslab Soil Exhaust Systems > 512.4 Termination
512.4 Exhaust Systems, Termination
Subslab soil exhaust system ducts shall extend through the roof and terminate at least 6 inches (152 mm) above the roof and at least 10 feet (3048 mm ...
NYC Mechanical Code 2014 > 5 Exhaust Systems > 512 Subslab Soil Exhaust Systems > 512.4 Termination
904.5 Vents, Location of Vent Terminal
, to a level above the higher existing roof. A door, operable ...
NYC Plumbing Code 2014 > 9 Vents > 904 Vent Terminals > 904.5 Location of Vent Terminal
904.5 Vents, Location of Vent Terminal
, operable window, or other air intake opening of the building or of an adjacent building, and any such vent terminal shall not be within 10 feet (3048 ...
NYC Plumbing Code 2008 > 9 Vents > 904 Vent Terminals > 904.5 Location of Vent Terminal
1607.11.2.1 Structural Design, Flat, Pitched and Curved Roofs
and materials during maintenance and repair operations, a lower roof load than specified in the following equations shall not be used unless approved ...
NYC Building Code 2014 > 16 Structural Design > 1607 Live Loads > 1607.11 Roof Loads > 1607.11.2 Reduction in Roof Live Loads > 1607.11.2.1 Flat, Pitched and Curved Roofs
Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.


LEARN MORE
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
Contact Us Privacy Terms