// CODE SNIPPET
R908.4 Roof RE-Covering
JUMP TO FULL CODE CHAPTER
Where the application of a new roof covering over wood shingle or shake roofs creates a combustible concealed space, the entire existing surface shall be covered with gypsum board, mineral fiber, glass fiber or other approved materials securely fastened in place.
Related Code Sections
R908.3.1 Roof Assemblies, Roof RE-Cover
A roof re-cover shall not be permitted where any ...
California Residential Code 2016 > 9 Roof Assemblies > R908 Reroofing > R908.3 Roof Replacement > R908.3.1 Roof RE-Cover
R908.1 Roof Assemblies, General
Materials and methods of application used for re-covering or replacing an existing roof covering shall comply with the requirements of Chapter 9 ...
1015.6 Means of Egress, Mechanical Equipment, Systems and Devices
are affixed for use during the entire roof covering lifetime. The devices shall be re-evaluated for possible replacement when the entire roof covering ...
California Fire Code 2016 > 10 Means of Egress > 1015 Guards > 1015.6 Mechanical Equipment, Systems and Devices
Section R908 Roof Assemblies, Reroofing
Materials and methods of application used for re-covering or replacing an existing roof covering shall comply with the requirements of Chapter 9 ...
Section 1504 Roof Assemblies and Rooftop Structures, Performance Requirements
) . Wind loads on clay and concrete tile roof coverings shall be in accordance with Section 1609.5 ...
California Building Code 2016 (Vol 1 & 2) > 15 Roof Assemblies and Rooftop Structures > 1504 Performance Requirements