// CODE SNIPPET
R804.3.2.3 Roof Rafter Splice
JUMP TO FULL CODE CHAPTER
Roof rafters shall not be spliced.
Related Code Sections
R804.3.2.3 Roof-Ceiling Construction, Roof Rafter Splice
Roof rafters shall not be spliced ...
Residential Code 2018 of Kansas > 8 Roof-Ceiling Construction > R804 Cold-Formed Steel Roof Framing > R804.3 Roof Construction > R804.3.2 Roof Rafters > R804.3.2.3 Roof Rafter Splice
R802.4 Roof-Ceiling Construction, Rafters
COMMON LUMBER SPECIES (Roof live load = 20 psf, ceiling not attached to rafters, L/Δ = 180)
RAFTER SPACING (inches)
SPECIES AND GRADE ...
Residential Code 2018 of Kansas > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.4 Rafters
R802.5.2.2 Roof-Ceiling Construction, Rafter Ties
Wood rafter ties shall be not less than 2 inches by 4 inches (51 mm × 102 mm) installed in accordance with Table R802.5.2 at each rafter. Other ...
Residential Code 2018 of Kansas > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.5 Ceiling Joists > R802.5.2 Ceiling Joist and Rafter Connections > R802.5.2.2 Rafter Ties
Article 394 Wiring Methods and Materials, Concealed Knob-And-Tube Wiring
of or through bored holes in floor joists, studs, or rafters. Exception: In buildings completed before the wiring is installed, attic and roof spaces ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 394 Concealed Knob-And-Tube Wiring
R602.10.8 Wall Construction, Braced Wall Panel Connections
Top plates of exterior braced wall panels shall be attached to rafters or roof trusses above in accordance with Table ...
Residential Code 2018 of Kansas > 6 Wall Construction > R602 Wood Wall Framing > R602.10 Wall Bracing > R602.10.8 Braced Wall Panel Connections