// CODE SNIPPET
1910.262(ii) Roll Bench
JUMP TO FULL CODE CHAPTER
Cleats shall be installed on the ends of roll benches.
Related Code Sections
1910.262(ii) Special Industries, Roll Bench
Cleats shall be installed on the ends of roll benches ...
1910.215(b)(3) Machinery and Machine Guarding, Bench and Floor Stands
The angular exposure of the grinding wheel periphery and sides for safety guards used on machines known as bench and floor stands should not exceed ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.215 Abrasive Wheel Machinery > 1910.215(b) Guarding of Abrasive Wheel Machinery > 1910.215(b)(3) Bench and Floor Stands
1910.211(e)(8) Machinery and Machine Guarding, Forging Rolls
Forging rolls mean a class of auxiliary forging equipment wherein stock is shaped between power driven rolls bearing contoured dies. Usually used ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(e) > 1910.211(e)(8) Forging Rolls
1910.261(l)(1) Special Industries, Cleaning Rolls
Rolls shall be cleaned only on the outrunning side ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(l) Finishing Room > 1910.261(l)(1) Cleaning Rolls
1910.262(e)(3) Special Industries, Stripping Rolls
On operations calling for flat strippings which are allowed to fall on the doffer cover, where such strippings are removed by hand, the doffer cover ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(e) Cotton Cards > 1910.262(e)(3) Stripping Rolls