// CODE SNIPPET
2215.5 Ribbed Bolts
JUMP TO FULL CODE CHAPTER
Ribbed bolts shall be made from carbon manganese steel with a minimum tensile strength of 70,000 per square inch (482.7 MPa).
Related Code Sections
2215.5 Steel, Ribbed Bolts
Ribbed bolts shall be made from carbon manganese steel with a minimum tensile strength of 70,000 per square inch (482.7 MPa) ...
2014 FBC - Building, 5th edition > 22 Steel > 2215 High-Velocity Hurricane Zones—Material > 2215.5 Ribbed Bolts
722.2.1.1.4 Fire and Smoke Protection Features, Ribbed or Undulating Surfaces
The equivalent thickness of panels with ribbed or undulating surfaces shall be determined by one of the following expressions: For s ≥ 4 t ...
2017 FBC - Building, 6th edition > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.2 Concrete Assemblies > 722.2.1 Concrete Walls > 722.2.1.1 Cast-In-Place or Precast Walls > 722.2.1.1.4 Ribbed or Undulating Surfaces
722.2.1.1.4 Fire and Smoke Protection Features, Ribbed or Undulating Surfaces
The equivalent thickness of panels with ribbed or undulating surfaces shall be determined by one of the following expressions: For s ≥ 4 t ...
2014 FBC - Building, 5th edition > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.2 Concrete Assemblies > 722.2.1 Concrete Walls > 722.2.1.1 Cast-In-Place or Precast Walls > 722.2.1.1.4 Ribbed or Undulating Surfaces
722.2.1.1.4 Fire and Smoke Protection Features, Ribbed or Undulating Surfaces
The equivalent thickness of panels with ribbed or undulating surfaces shall be determined by one of the following expressions: For s ≥ 4 t ...
2020 FBC - Building, 7th edition > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.2 Concrete Assemblies > 722.2.1 Concrete Walls > 722.2.1.1 Cast-In-Place or Precast Walls > 722.2.1.1.4 Ribbed or Undulating Surfaces
2109.3.3.1 Masonry, Bolts
Bolt values shall not exceed those set forth in Table 2109.3.3.1. TABLE 2109.3.3.1 ALLOWABLE SHEAR ON BOLTS IN ADOBE MASONRY DIAMETER OF ...
2014 FBC - Building, 5th edition > 21 Masonry > 2109 Empirical Design of Masonry > 2109.3 Adobe Construction > 2109.3.3 Allowable Stress > 2109.3.3.1 Bolts