// CODE SNIPPET
803.1.2.3 Return Air Filters
Go To Full Code Chapter
Where a forced air HVAC system is used during construction, new return air filters shall be installed prior to system flush out and building occupancy.
Upcodes Diagrams
Related Code Sections
803.1.2.3 Indoor Environmental Quality and Comfort, Return Air Filters
Where a forced air HVAC system is used during construction, new return air filters shall be installed prior to system flush out and building ...
605.1 Duct Systems, General
Heating and air-conditioning systems shall be provided with approved air filters. Filters shall be installed such that all return air, outdoor air ...
606.2.1 Duct Systems, Return Air Systems
Smoke detectors shall be installed in return air systems with a design capacity greater than 2,000 cfm (0.9 m3/s), in the return air duct or plenum ...
6.4 Systems and Equipment, Filtration
Filtration of mechanically supplied air shall be provided as follows:
Particulate matter filters, minimum MERV-8, shall be provided upstream ...
606.3 ENERGY CONSERVATION, EFFICIENCY AND CO2e EMISSION REDUCTION, Duct and Plenum Insulation, Sealing and Testing
Supply and return air ducts and plenums, air handlers and filter boxes shall be insulated and sealed in accordance with Section C403.2.7.1.1 ...