Means of egressrampsshall not reduce in width in the direction of egress travel. Projections into the required rampand landing width are prohibited. Doors opening onto a landing shall not reduce the clear width to less than 42 inches (1067 mm).
Share URL
Copy and paste the link below into emails, chats or browsers.
If the requirements stated in paragraphs(a)(1)(i) and (a)(1)(ii) of this section cannot be followed then welding and cutting shall not be performed ...
It shall be unlawful to place, or cause or permit to be placed, on any floor or roof of a building, structure or portion thereof, a load greater than ...