// CODE SNIPPET
1910.265(c)(31)(ii) Restricted Overhead Clearance
JUMP TO FULL CODE CHAPTER
All areas of restricted side or overhead clearance shall be plainly marked.
Related Code Sections
1910.265(c)(31)(ii) Special Industries, Restricted Overhead Clearance
All areas of restricted side or overhead clearance shall be plainly marked ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(c) Building Facilities, and Isolated Equipment > 1910.265(c)(31) Traffic Control and Flow > 1910.265(c)(31)(ii) Restricted Overhead Clearance
1910.179(a)(25) Materials Handling and Storage, Clearance
Clearance means the distance from any part of the crane to a point of the nearest obstruction ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(a) Definitions Applicable to This Section > 1910.179(a)(25) Clearance
1910.333(c)(3) Electrical, Overhead Lines
structure elevated near energized overhead lines shall be operated so that a clearance of 10 ft. (305 cm) is maintained. If the voltage is higher ...
OSHA 1910 General Industry > S Electrical > 1910.333 Selection and Use of Work Practices > 1910.333(c) Working on or Near Exposed Energized Parts > 1910.333(c)(3) Overhead Lines
1910.219(o)(3) Machinery and Machine Guarding, Guards for Horizontal Overhead Belts
they protect, except that this clearance need not in any case exceed six (6) inches on each side. Overhead rope drive and block and roller-chain-drive guards ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(o) Approved Materials > 1910.219(o)(3) Guards for Horizontal Overhead Belts
1910.268(n) Special Industries, Overhead Lines
to ground) shall be guarded or otherwise prevented from direct contact with overhead energized power conductors ...
OSHA 1910 General Industry > R Special Industries > 1910.268 Telecommunications > 1910.268(n) Overhead Lines