// CODE SNIPPET
1926.1101(j)(3) Requirements for Class IV Work
Go To Full Code Chapter
Employers shall ensure that employees performing Class IV work within a regulated area comply with the hygiene practice required of employees performing work which has a higher classification within that regulated area. Otherwise employers of employees cleaning up debris and material which is TSI or surfacing ACM or identified as PACM shall provide decontamination facilities for such employees which are required by paragraph (j)(2) of this section.
Related Code Sections
1926.1101(j)(3) Toxic and Hazardous Substances, Requirements for Class IV Work
Employers shall ensure that employees performing Class IV work within a regulated area comply with the hygiene practice required of employees ...
1926.1101(h) Toxic and Hazardous Substances, Respiratory Protection—
Class IV asbestos work performed within regulated ...
1926.1101(g)(10) Toxic and Hazardous Substances, Class IV Asbestos Work
) of this section. In addition, all Class IV jobs shall be conducted in conformity with the requirements set out in paragraph (g)(1) of this section ...
1926.1101(k)(9) Toxic and Hazardous Substances, Employee Information and Training
The employer shall train each employee who is likely to be exposed in excess of a PEL, and each employee who performs Class I through IV asbestos ...
1926.1101(g)(7)(iv) Toxic and Hazardous Substances,
All Class II asbestos work shall be performed using the work practices and requirements set out above in paragraph (g)(1)(i) through (g)(1)(iii ...