UpCodes logo
Go To Full Code Chapter
Heating facilities shall be required in every dwelling unit or portion thereof which is to be rented, leased or let on terms, either expressed or implied, to furnish heat to the occupants thereof. The heating facilities shall be capable of maintaining the room temperature at 65°F (18°C) during the period from October 15 to May 1 during the hours between 6:30 a.m. and 10:30 p.m. of each day and not less than 60°F (16°C) during other hours when measured at a point 3 feet (914 mm) above the floor and 3 feet (914 mm) from the exterior walls. The capability of the heating system shall be based on the outside design temperature required for the locality by this code.
Upcodes Diagrams

Related Code Sections

2801.1.1 Mechanical Systems, Required Heating in Dwelling Units
Heating facilities shall be required in every dwelling unit or portion thereof which is to be rented, leased or let on terms, either expressed ...
2801.1.1 Mechanical Systems, Required Heating in Dwelling Units
Heating facilities shall be required in every dwelling unit or portion thereof which is to be rented, leased or let on terms, either expressed ...
2801.1.1 Mechanical Systems, Required Heating in Dwelling Units
Heating facilities shall be required in every dwelling unit or portion thereof which is to be rented, leased or let on terms, either expressed ...
R1005.3 Chimneys and Fireplaces, Solid-Fuel Appliances
Factory-built chimneys installed in dwelling units with solid-fuel-burning appliances shall comply with the Type HT requirements of UL 103 and shall ...