// CODE SNIPPET
3306.5.1 Required Documents
JUMP TO FULL CODE CHAPTER
Submittal documents shall be approved by the department before demolition work begins. Such submittal documents shall be signed, sealed, and submitted by a registered design professional and shall contain, at a minimum, the following:
- Plans, sections, and details of the building or portion thereof, to be demolished clearly showing the extent and sequence of the demolition;
- Bracing and shoring necessary to support all demolition operations, and adjoining ground or structures as needed, through all sequences of the demolition;
- Where mechanical demolition equipment, other than handheld devices, is to be used, a listing and description of all such proposed equipment to be used in the demolition, including the scope of equipment work and positioning of equipment on the existing structure. The description of the equipment shall include calculations showing the adequacy of the existing structure to support loads imposed by such equipment. If more than one piece of demolition equipment is proposed to be used at the same time, the effect of the simultaneous loads imposed on the existing structure shall be described and investigated; and
- A description of compliance with the applicable provisions of Section 3306.9 of this code.