// CODE SNIPPET
§40-31 Required Approvals of Appliances
JUMP TO FULL CODE CHAPTER
Gas-fueled space and water heaters, installed after December 18, 1957, in apartments in multiple dwellings, in lieu of centrally supplied heat or hot water where such centrally supplied heat or hot water supply is required by the Multiple Dwelling Code, and in one and two family dwellings installed after October 1, 1964 shall be of types approved by the Department of Buildings and the American Gas Association.
Related Code Sections
Appendix A Selected Rules of the Department of Buildings [PDF] (page 5)
of Gas-Fueled Heaters §40-31 Required Approvals of Appliances §40-32 Prohibited Types of Water Heaters §40-33 Number and Capacity of Gas-Fueled Heaters ...
406.6.2.1.1 Gas Piping Installations, Existing Gas Piping
Any gas piping system or part thereof that has been
previously energized and has been shut down shall be required to obtain a certificate of
approval ...
NYC Fuel Gas Code 2022 > 4 Gas Piping Installations > 406 Inspection, Testing and Purging > 406.6 Piping System and Equipment Leakage Check > 406.6.2 Before Turning Gas On > 406.6.2.1 Gas Authorization Required > 406.6.2.1.1 Existing Gas Piping
301.6 General Regulations, Label Information
rating in Btu/h (W); type of fuel approved for use with the appliance; and required clearances. Electric comfort heating appliances: Name and trade-mark ...
301.6 General Regulations, Label Information
rating in Btu/h (W); type of fuel approved for use with the appliance; and required clearances. Electric comfort heating appliances: Name and trade ...
503.12.2.1 Chimneys and Vents, Draft Hood Required
or approved type and, in the absence of other instructions, shall be of the same size as the appliance flue collar. Where a draft hood is required ...
NYC Fuel Gas Code 2014 > 5 Chimneys and Vents > 503 Venting of Appliances > 503.12 Draft Hoods and Draft Controls > 503.12.2 Installation > 503.12.2.1 Draft Hood Required