// CODE SNIPPET
4126.96.36.199 Repairs or Alterations of Pool Structure and Equipment
JUMP TO FULL CODE CHAPTER
Replacement of the pool or spa shell is considered to be construction of a new facility and shall be processed as such. Resurfacing the pool interior to original nontoxic, slip-resistant and smooth specifications is considered a repair or alteration. Equivalent replacement of equipment is not considered a repair or alteration. The following items shall be addressed during resurfacing projects:
The lip of the gutter must be leveled to within 1/4 inch (6.4 mm) between the highest and lowest point and the downward slope from the lip to the drain must be maintained as originally designed or increased, but shall not exceed new construction standards.
Where applicable, the slope break marking must be installed meeting the requirements of Section 4188.8.131.52.3.2 and safety line must be installed 2 feet (610 mm) before the marking.
Depth markers and NO DIVING markers must be installed in accordance with Section 4184.108.40.206.
Should resurfacing works affect the step riser heights, no riser shall exceed 12 inches (305 mm) for pools and 12 inches (305 mm) for spas, and the intermediate risers shall be made uniform.