// CODE SNIPPET

704.7 Reinforcing

Building Code 2015 of Alabama > 7 Fire and Smoke Protection Features > 704 Fire-Resistance Rating of Structural Members > 704.7 Reinforcing

JUMP TO FULL CODE CHAPTER

Thickness of protection for concrete or masonry reinforcement shall be measured to the outside of the reinforcement except that stirrups and spiral reinforcement ties are permitted to project not more than 0.5-inch (12.7 mm) into the protection.

Related Code Sections

1810.3.10.3 Soils and Foundations, Reinforcement

, the steel pipe or tube or steel reinforcement shall be designed to carry at least 40 percent of the design compression load. Micropiles or portions ...

Building Code 2009 of Alabama > 18 Soils and Foundations > 1810 Deep Foundations > 1810.3 Design and Detailing > 1810.3.10 Micropiles > 1810.3.10.3 Reinforcement

1810.3.10.3 Soils and Foundations, Reinforcement

, the steel pipe or tube or steel reinforcement shall be designed to carry at least 40 percent of the design compression load. Micropiles or portions ...

Building Code 2015 of Alabama > 18 Soils and Foundations > 1810 Deep Foundations > 1810.3 Design and Detailing > 1810.3.10 Micropiles > 1810.3.10.3 Reinforcement

1908.4 Concrete, Reinforcement

Reinforcement used in shotcrete construction shall comply with the provisions of Sections 1908.4.1 through 1908.4.4 ...

Building Code 2015 of Alabama > 19 Concrete > 1908 Shotcrete > 1908.4 Reinforcement

1913.4 Concrete, Reinforcement

Reinforcement used in shotcrete construction shall comply with the provisions of Sections 1913.4.1 through 1913.4.4 ...

Building Code 2009 of Alabama > 19 Concrete > 1913 Shotcrete > 1913.4 Reinforcement

1915.4 Concrete, Reinforcement

To increase the safe load-supporting capacity of concrete-filled pipe columns, the steel reinforcement shall be in the form of rods, structural ...

Building Code 2009 of Alabama > 19 Concrete > 1915 Concrete-Filled Pipe Columns > 1915.4 Reinforcement