// CODE SNIPPET
81-242 Regulations on Minimum Spacing Between Buildings
JUMP TO FULL CODE CHAPTER
When a building containing residential uses is located on the same zoning lot as another building, the provisions of Section 23-70 (MINIMUM REQUIRED DISTANCE BETWEEN TWO OR MORE BUILDINGS ON A SINGLE ZONING LOT) shall not apply.
Related Code Sections
Section 305 General Regulations, Protection of Pipes and Plumbing System Components
Annular spaces between sleeves and pipes shall be filled or tightly caulked ...
NYC Plumbing Code 2008 > 3 General Regulations > 305 Protection of Pipes and Plumbing System Components
Section 308 General Regulations, Clearance Reduction
an airspace between the protective assembly and the protected material or assembly shall be noncombustible. Where a space between the protective assembly ...
Section 305 General Regulations, Protection of Pipes and Plumbing System Components
Annular spaces between sleeves and pipes shall be filled ...
NYC Plumbing Code 2014 > 3 General Regulations > 305 Protection of Pipes and Plumbing System Components
Section 308 General Regulations, Clearance Reduction
, minimum nominal thickness of 0.024 inch (No. 24 Gage), having a 1-inch airspace between layers, spaced 1 inch off the combustible assembly ...
Section 306 General Regulations, Access and Service Space
shall be a minimum of 18 inches (457 mm) between rails. Rungs shall have a minimum diameter of 0.75-inch (19 mm) and shall be capable of withstanding ...