// CODE SNIPPET
109-15 Regulations for Rehabilitation or Conversion of Existing Buildings
JUMP TO FULL CODE CHAPTER
When residential buildings or residential portions of mixed buildings are rehabilitated, the density regulations of the underlying districts shall not apply. In lieu thereof, there shall be not more than one room for each 230 square feet of gross floor area within the rehabilitated residential building or residential portion of a mixed building.
Furthermore, when a non-residential building, or portion thereof, is converted for residential use, the density regulations of the underlying districts shall not apply to that portion of the building containing dwelling units. In lieu thereof, there shall be not more than one room for each 230 square feet of gross floor area provided within the converted building or portion thereof.
Related Code Sections
Article 210 Enforcement, Illegal Conversions
, the address of the building or structure with respect to which the violation occurred and the time period during which the violation was found to have existed ...
Article 210 Enforcement, Illegal Conversions
authorized number of families or to assist, take part in, maintain or permit the maintenance of such conversion. Upon the finding of such violation ...
301.7.1 General Regulations, Appliance Fuel Conversion
Appliances shall not be converted to utilize a different fuel gas except where complete instructions for such conversion are provided in installation ...
NYC Fuel Gas Code 2014 > 3 General Regulations > 301 General > 301.7 Fuel Types > 301.7.1 Appliance Fuel Conversion
§27-120 Administration and Enforcement, Alterations to Multiple Dwelling and Conversions to Multiple Dwellings
At the option of the owner, regardless of the cost of the alteration or conversion, an alteration may be made to a multiple dwelling or a building ...
NYC 1968 Code (Vol I) > 1 Administration and Enforcement > 4 Alterations of Existing Buildings > §27-120 Alterations to Multiple Dwelling and Conversions to Multiple Dwellings
Section 619 Specific Appliances, Conversion Burners
The installation of conversion burners shall conform to ANSI Z21.8 and ASME CSD-1, including Appendix C ...