// CODE SNIPPET
A110.4 Redundancy and Overstrength Factors
JUMP TO FULL CODE CHAPTER
Any redundancy or overstrength factors contained in the building code may be taken as unity. The vertical component of earthquake load (Ev) may be taken as zero.
Related Code Sections
A110.4 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings, Redundancy and Overstrength Factors
Any redundancy or overstrength factors contained in the building code may be taken as unity. The vertical component of earthquake load ( E v ) may ...
Existing Building Code 2015 of Idaho > A1 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings > A110 General Procedure > A110.4 Redundancy and Overstrength Factors
1605.1 Structural Design, General
1605.2, 1605.3.1 or 1605.3.2. The load combinations specified in Chapters 18 through 23. The seismic load effects including overstrength factor ...
1605.1 Structural Design, General
or 1605.3.2;
The load combinations specified in Chapters 18 through 23; and
The seismic load effects including overstrength factor in accordance ...
408.4.3 Special Detailed Requirements Based on Occupancy and Use, Redundant Operation
release mechanism at each door, or shall be provided with a redundant remote release control ...
Building Code 2018 of Idaho > 4 Special Detailed Requirements Based on Occupancy and Use > 408 Group I-3 > 408.4 Locks > 408.4.3 Redundant Operation
408.4.3 Special Detailed Requirements Based on Use and Occupancy, Redundant Operation
release mechanism at each door, or shall be provided with a redundant remote release control ...
Building Code 2015 of Idaho > 4 Special Detailed Requirements Based on Use and Occupancy > 408 Group I-3 > 408.4 Locks > 408.4.3 Redundant Operation