// CODE SNIPPET
806.2 Reduced Width Required
JUMP TO FULL CODE CHAPTER
Where an offset ledge is located less than 42 inches (1067 mm) below the design waterline, the width of such ledge shall be proportionately less than 8 inches (203 mm) in width so as to fall within 11 degrees of vertical as measured from the top of the design waterline.
Related Code Sections
806.2 Permanent Inground Residential Swimming Pools, Reduced Width Required
Where an offset ledge is located less than 42 inches (1067 mm) below the design waterline , the width of such ledge shall be proportionately less ...
Swimming Pool and Spa Code 2015 of Washington > 8 Permanent Inground Residential Swimming Pools > 806 Offset Ledges > 806.2 Reduced Width Required
806.2 Permanent Inground Residential Swimming Pools, Reduced Width Required
Where an offset ledge is located less than 42 inches (1067 mm) below the design waterline , the width of such ledge shall be proportionately less ...
Swimming Pool and Spa Code 2018 of Washington > 8 Permanent Inground Residential Swimming Pools > 806 Offset Ledges > 806.2 Reduced Width Required
307.5 Building Blocks, Required Clear Width
Protruding objects shall not reduce the clear width required for accessible routes ...
Accessible and Usable Buildings and Facilities 2009 of Washington > 3 Building Blocks > 307 Protruding Objects > 307.5 Required Clear Width
1005.7.1 Means of Egress, Doors
Doors, when fully opened, shall not reduce the required width by more than 7 inches (178 mm). Doors in any position shall not reduce the required ...
2015 Washington State Building Code > 10 Means of Egress > 1005 Means of Egress Sizing > 1005.7 Encroachment > 1005.7.1 Doors
1005.7.1 Means of Egress, Doors
Doors, when fully opened, shall not reduce the required width by more than 7 inches (178 mm). Doors in any position shall not reduce the required ...
2015 Washington State Fire Code > 10 Means of Egress > 1005 Means of Egress Sizing > 1005.7 Encroachment > 1005.7.1 Doors