// CODE SNIPPET
1002.8 Recess for Trap Connection
JUMP TO FULL CODE CHAPTER
A recess provided for connection of the underground trap, such as one serving a bathtub in slab-type construction, shall have sides and a bottom of corrosion-resistant, insect- and verminproof construction.
Related Code Sections
1002.8 Traps, Interceptors and Separators, Recess for Trap Connection
A recess provided for connection of the underground trap, such as one serving a bathtub in slab-type construction, shall have sides and a bottom ...
Plumbing Code 2018 of Kansas > 10 Traps, Interceptors and Separators > 1002 Trap Requirements > 1002.8 Recess for Trap Connection
Section 1103 Storm Drainage, Traps
Leaders and storm drains connected to a combined sewer shall be trapped. Individual storm water traps shall be installed on the storm water drain ...
706.2 Sanitary Drainage, Obstructions
shall be of the recessed drainage type. This section shall not be applicable to tubular waste fittings used to convey vertical flow upstream ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 706 Connections Between Drainage Piping and Fittings > 706.2 Obstructions
(1) Equipment for General Use, Recessed
Recessed high-intensity luminaires designed to be installed in wall or ceiling cavities shall have thermal protection and be identified as thermally ...
National Electrical Code 2017 of Kansas > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.130 General > (F) High-Intensity Discharge Luminaires > (1) Recessed
P3201.1 Traps, Design of Traps
traps shall be not less than No. 20 gage (0.8 mm) thickness. Solid connections, slip joints and couplings shall be permitted to be used on the trap ...