// CODE SNIPPET
1910.111(d)(14) Receiver and Liquid Drain
JUMP TO FULL CODE CHAPTER
A receiver shall be provided with a liquid-level control to discharge the liquid ammonia to storage. The receiver shall be designed for at least 250 p.s.i.g. and be equipped with the necessary connections, safety valves, and gaging device.
Related Code Sections
1910.111(d)(14) Hazardous Materials, Receiver and Liquid Drain
A receiver shall be provided with a liquid-level control to discharge the liquid ammonia to storage. The receiver shall be designed for at least 250 ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.111 Storage and Handling of Anhydrous Ammonia > 1910.111(d) Refrigerated Storage Systems > 1910.111(d)(14) Receiver and Liquid Drain
1910.169(b)(2) Compressed Gas and Compressed Air Equipment, Drains and Traps
A drain pipe and valve shall be installed at the lowest point of every air receiver to provide for the removal of accumulated oil and water. Adequate ...
OSHA 1910 General Industry > M Compressed Gas and Compressed Air Equipment > 1910.169 Air Receivers > 1910.169(b) Installation and Equipment Requirements > 1910.169(b)(2) Drains and Traps
1910.125(c) Hazardous Materials,
provide a bottom drain for dip tanks that contain more than 500 gallons (1893 L) of liquid, unless ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.125 Additional Requirements for Dipping and Coating Operations That Use Flammable Liquids or Liquids With Flashpoints Greater Than 199.4 *F (93 *C) > 1910.125(c)
1910.110(d)(11) Hazardous Materials, Drains
No drains or blowoff lines shall be directed into or in proximity to sewer systems used for other purposes ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.110 Storage and Handling of Liquefied Petroleum Gases > 1910.110(d) > 1910.110(d)(11) Drains
1910.106(a)(24) Hazardous Materials,
or receiving of professional services ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(a) Definitions > 1910.106(a)(24)