// CODE SNIPPET
901.9 Recall of Fire Protection System Components
JUMP TO FULL CODE CHAPTER
A component of a fire protection system regulated by this code that is subject to a voluntary or mandatory recall under federal law shall be replaced with an approved, listed component in compliance with the referenced standards. A record of the replacement of the component shall be maintained in accordance with FC107.7.
Related Code Sections
3008.8.1 Elevators and Conveying Systems, Elevator Recall
The fire command center or an alternate location approved by the Fire Department shall be provided with the means to manually initiate a Phase I ...
NYC Building Code 2014 > 30 Elevators and Conveying Systems > 3008 Occupant Evacuation Elevators > 3008.8 Elevator System Monitoring > 3008.8.1 Elevator Recall
3002.1 Elevators and Conveying Systems, Hoistway Enclosure Protection
Openings in hoistway enclosures shall be protected as required in Chapter 7. Exception ...
NYC Building Code 2014 > 30 Elevators and Conveying Systems > 3002 Hoistway Enclosures > 3002.1 Hoistway Enclosure Protection
§28-109.3 Administration, Scope
detection equipment. Location of fire command station. Elevator recall. Emergency lighting and power. Standpipes. Sprinklers ...
Section 911 Fire Protection Systems, Fire Command Center
indicators. Elevator fire recall switch in accordance with ASME A17.1. Auxiliary Radio Communication System Panel. Elevator control ...
708.14.2.1 Fire and Smoke Protection Features, Pressurization Requirements
door, with all elevator cars at the floor of recall and all hoistway doors on the floor of recall open and all other hoistway doors closed. The opening ...
NYC Building Code 2014 > 7 Fire and Smoke Protection Features > 708 Shaft Enclosures > 708.14 Elevator, Dumbwaiter and Other Hoistways > 708.14.2 Enclosed Elevator Lobby > 708.14.2.1 Pressurization Requirements