// CODE SNIPPET
1910.261(f)(6) Rag Cookers
JUMP TO FULL CODE CHAPTER
When cleaning, inspection, or other work requires that persons enter rag cookers, all steam and water valves, or other control devices, shall be locked and tagged in the closed or "off" position. Blank flanging of pipelines is acceptable in place of closed and locked valves.
[Reserved]
Rag cookers shall be provided with safety valves in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels—1968, with Addenda.
When cleaning, inspection, or other work requires that persons must enter the cooker, one person shall be stationed outside in a position to observe and assist in case of emergency, in accordance with paragraph (b)(5) of this section.
Related Code Sections
1910.261(f)(6) Special Industries, Rag Cookers
When cleaning, inspection, or other work requires that persons enter rag cookers, all steam and water valves, or other control devices, shall ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(f) Rag and Old Paper Preparation > 1910.261(f)(6) Rag Cookers
1910.261 Special Industries, Pulp, Paper, and Paperboard Mills
cleaning, inspection, or other work requires that persons enter rag cookers, all steam and water valves, or other control devices, shall ...
1910.262(h)(1)(vii) Special Industries, Expansion Chambers
Slasher kettles and cookers shall be provided with expansion chambers in the covers, or drains, to prevent surging over. Steam-control valves shall ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(h) Slashers > 1910.262(h)(1) Cylinder Dryers > 1910.262(h)(1)(vii) Expansion Chambers
1910.262(h)(2)(v) Special Industries, Expansion Chambers
Slasher kettles and cookers shall be provided with expansion chambers in the covers, or drains, to prevent surging over. Steam control valves shall ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(h) Slashers > 1910.262(h)(2) Enclosed Hot Air Dryer > 1910.262(h)(2)(v) Expansion Chambers
1910.107(g)(3) Hazardous Materials, Residue Disposal
cans shall be provided wherever rags or waste are impregnated with finishing material and all such rags or waste deposited therein immediately after ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.107 Spray Finishing Using Flammable and Combustible Materials > 1910.107(g) Operations and Maintenance > 1910.107(g)(3) Residue Disposal