// CODE SNIPPET
510.4.2.8 Radio Communication Antenna Density
JUMP TO FULL CODE CHAPTER
Systems shall be engineered to minimize the near-far effect. Radio enhancement system designs shall include sufficient antenna density to address reduced gain conditions.
Exceptions:
- Class A narrow band signal booster devices with independent AGC/ALC circuits per channel.
- Systems where all portable devices within the same band use active power control features.
Related Code Sections
510.4.2.8 Fire Service Features, Radio Communication Antenna Density
Systems shall be engineered to minimize the near-far effect. Radio enhancement system designs shall include sufficient antenna density to address ...
2020 Fire Code of NYS > 5 Fire Service Features > 510 Emergency Responder Radio Coverage > 510.4 Technical Requirements > 510.4.2 System Design > 510.4.2.8 Radio Communication Antenna Density
510.4.2.1 Fire Service Features, Amplification Systems Allowed
antenna system with Federal Communications Commission (FCC)-certified signal boosters, or other system approved by the fire code official in order ...
Fire Code 2015 of New York State > 5 Fire Service Features > 510 Emergency Responder Radio Coverage > 510.4 Technical Requirements > 510.4.2 System Design > 510.4.2.1 Amplification Systems Allowed
E4304.4 Class 2 Remote-Control, Signaling and Power-Limited Circuits, Class 2 Cables With Other Circuit Cables
of NFPA 70. Communications circuits in compliance with Article 800 of NFPA 70. Community antenna television and radio distribution systems ...
Residential Code 2015 of New York State > 43 Class 2 Remote-Control, Signaling and Power-Limited Circuits > E4304 Installation Requirements > E4304.4 Class 2 Cables With Other Circuit Cables
E4304.4 Class 2 Remote-Control, Signaling and Power-Limited Circuits, Class 2 Cables With Other Circuit Cables
of NFPA 70. Communications circuits in compliance with Article 800 of NFPA 70. Community antenna television and radio distribution systems in compliance ...
2020 Residential Code of New York State > 43 Class 2 Remote-Control, Signaling and Power-Limited Circuits > E4304 Installation Requirements > E4304.4 Class 2 Cables With Other Circuit Cables
510.5 Fire Service Features, Installation Requirements
brand and model used by the agency talking through the agency's radio communications system or equipment approved by the fire code official. Failure ...
2020 Fire Code of NYS > 5 Fire Service Features > 510 Emergency Responder Radio Coverage > 510.5 Installation Requirements