// CODE SNIPPET
N1102.1.3 (R402.1.3) R-Value Computation
JUMP TO FULL CODE CHAPTER
Insulation material used in layers, such as framing cavity insulation or continuous insulation, shall be summed to compute the corresponding component R-value. The manufacturer's settled R-value shall be used for blown-in insulation. Computed R-values shall not include an R-value for other building materials or air films. Where insulated siding is used for the purpose of complying with the continuous insulation requirements of Table N1102.1.2, the manufacturer's labeled R-value for insulated siding shall be reduced by R-0.6.
Related Code Sections
N1102.1.3 [RE] Energy Efficiency, (R402.1.3) R-Value Computation
component R -value. The manufacturer's settled R -value shall be used for blown-in insulation. Computed R -values shall not include an R -value for other ...
Residential Code 2018 of Kansas > 11 [RE] Energy Efficiency > N1102 (R402) Building Thermal Envelope > N1102.1 (R402.1) General (Prescriptive) > N1102.1.3 (R402.1.3) R-Value Computation
R402.1.3 [RE] Residential Energy Efficiency, R-Value Computation
component R -value. The manufacturer's settled R -value shall be used for blown-in insulation. Computed R -values shall not include an R -value ...
Energy Conservation Code 2018 of Kansas > 4 [RE] Residential Energy Efficiency > R402 Building Thermal Envelope > R402.1 General (Prescriptive) > R402.1.3 R-Value Computation
709.1 Sanitary Drainage, Values for Fixtures
bathtub attachment does not increase the drainage fixture unit value. See Sections 709.2 through 709.4.1 for methods of computing unit value ...
1301.6.2.2 Performance Compliance Methods, Area Formula
The following formula shall be used in computing the area value. Determine the area value for each occupancy floor area on a floor-by-floor basis ...
Existing Building Code 2018 of Kansas > 13 Performance Compliance Methods > 1301 General > 1301.6 Evaluation Process > 1301.6.2 Building Area > 1301.6.2.2 Area Formula