// CODE SNIPPET
1926.960(b)(1) Qualified Employees Only
JUMP TO FULL CODE CHAPTER
Only qualified employees may work on or with exposed energized lines or parts of equipment.
Only qualified employees may work in areas containing unguarded, uninsulated energized lines or parts of equipment operating at 50 volts or more.
Related Code Sections
1926.960(b)(1) Electric Power Transmission and Distribution, Qualified Employees Only
Only qualified employees may work on or with exposed energized lines or parts of equipment ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.960 Working on or Near Exposed Energized Parts > 1926.960(b) General > 1926.960(b)(1) Qualified Employees Only
1926.54(a) Occupational Health and Environmental Controls,
Only qualified and trained employees shall be assigned to install, adjust, and operate laser equipment ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.54 Nonionizing Radiation > 1926.54(a)
1926.20(b)(4) General Safety and Health Provisions,
The employer shall permit only those employees qualified by training or experience to operate equipment and machinery ...
OSHA 1926 Construction > C General Safety and Health Provisions > 1926.20 General Safety and Health Provisions > 1926.20(b) Accident Prevention Responsibilities > 1926.20(b)(4)
1926.451(f)(7) Scaffolds,
Scaffolds shall be erected, moved, dismantled, or altered only under the supervision and direction of a competent person qualified in scaffold ...
OSHA 1926 Construction > L Scaffolds > 1926.451 General Requirements > 1926.451(f) Use > 1926.451(f)(7)
1926.404(d)(2) Electrical, Services Over 600 Volts, Nominal
Service-entrance conductors installed as open wires shall be guarded to make them accessible only to qualified persons ...
OSHA 1926 Construction > K Electrical > 1926.404 Wiring Design and Protection > 1926.404(d) Services > 1926.404(d)(2) Services Over 600 Volts, Nominal