// CODE SNIPPET
JUMP TO FULL CODE CHAPTER
Personnel who are trained and certified for the specific type of public emergency alarm reporting system and comply with one the following shall be considered qualified:
- Personnel who are licensed or certified by a state or local authority, if applicable
- * Personnel who are certified by a nationally recognized certification organization acceptable to the authority having jurisdiction
- Personnel who are employed and qualified by an organization listed by a nationally recognized testing laboratory for the design, installation, or servicing of systems within the scope of this chapter
- * Personnel who are employed and certified by an equipment manufacturer for the specific type of system
Related Code Sections
10.5.6.4 Fundamentals, Qualification
Personnel shall demonstrate qualification by being trained and certified in public emergency alarm reporting system design, installation, or service ...
National Fire Alarm and Signaling Code 2019 of Maine > 10 Fundamentals > 10.5 Personnel Qualifications > 10.5.6 Public Emergency Alarm Reporting System Personnel Qualification. (SIG-PRS) > 10.5.6.4 Qualification
1705.18.2 Special Inspections and Tests, Qualifications
Approved agencies for smoke control testing shall have expertise in fire protection engineering, mechanical engineering and certification as air ...
Commercial Building Code of the MUBEC and MUBC > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.18 Testing for Smoke Control > 1705.18.2 Qualifications
24.12.2* Emergency Communications Systems (ECS), Qualifications
The performance-based design and risk analysis shall be prepared by a design professional certified or approved by the authority having jurisdiction ...
National Fire Alarm and Signaling Code 2019 of Maine > 24 Emergency Communications Systems (ECS) > 24.12* Performance-Based Design of Mass Notification Systems > 24.12.2* Qualifications
5.1.3 Performance-Based Option, Qualifications
The performance-based design shall be prepared by a registered design professional ...
Life Safety Code 2018 of Maine > 5 Performance-Based Option > 5.1 General Requirements > 5.1.3 Qualifications
126.96.36.199 System Components and Hardware, Qualifications
Qualification of the welding procedure to be used and the performance of all welders ...
Standard for the Installation of Sprinkler Systems 2016 of Maine > 6 System Components and Hardware > 6.5 Joining of Pipe and Fittings > 6.5.2 Welded Pipe and Fittings > 188.8.131.52 Qualifications