// CODE SNIPPET
1910.262(h)(1)(iv) Pushbutton Control
JUMP TO FULL CODE CHAPTER
Slashers operated by pushbutton control shall have stop and start buttons located at each end of the machine, and additional buttons located on both sides of the machine, at the size box and the delivery end. If calender rolls are used, additional buttons shall be provided at both sides of the machine at points near the nips, except when slashers are equipped with an enclosed dryer.
Related Code Sections
1910.262(h)(1)(iv) Special Industries, Pushbutton Control
Slashers operated by pushbutton control shall have stop and start buttons located at each end of the machine, and additional buttons located on both ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(h) Slashers > 1910.262(h)(1) Cylinder Dryers > 1910.262(h)(1)(iv) Pushbutton Control
1910.179(g)(3)(i) Materials Handling and Storage,
Cranes not equipped with spring-return controllers or momentary contact pushbuttons shall be provided with a device which will disconnect all motors ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(g) Electric Equipment— > 1910.179(g)(3) Controllers > 1910.179(g)(3)(i)
1910.179(j)(3) Materials Handling and Storage, Periodic Inspection
apparatus, for signs of pitting or any deterioration of controller contactors, limit switches and pushbutton stations ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(j) Inspection— > 1910.179(j)(3) Periodic Inspection
1910.306(h)(7)(ii) Electrical,
Remote crane or hoist controls that may introduce hazardous electrical conditions into the cell line working zone shall employ one or more ...
OSHA 1910 General Industry > S Electrical > 1910.306 Specific Purpose Equipment and Installations > 1910.306(h) Electrolytic Cells > 1910.306(h)(7) Cranes and Hoists > 1910.306(h)(7)(ii)
1910.179(g)(1) Materials Handling and Storage, General
Where multiple conductor cable is used with a suspended pushbutton station, the station must ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(g) Electric Equipment— > 1910.179(g)(1) General