// CODE SNIPPET
1203.8.2 Push-Fit Joints
JUMP TO FULL CODE CHAPTER
Push-fit joints shall be installed in accordance with the manufacturer's instructions.
Related Code Sections
1203.14.3 Hydronic Piping, Push-Fit Joints
Push-fit joints that create a seal on the outside diameter of the tubing shall not be used with tubing that has an ethylene vinyl alcohol copolymer ...
Mechanical Code 2018 of Utah > 12 Hydronic Piping > 1203 Joints and Connections > 1203.14 Raised Temperature Polyethylene (PE-RT) Plastic Tubing > 1203.14.3 Push-Fit Joints
1203.8.2 Hydronic Piping, Push-Fit Joints
Push-fit joints shall be installed in accordance with the manufacturer's instructions ...
Mechanical Code 2015 of Utah > 12 Hydronic Piping > 1203 Joints and Connections > 1203.8 Copper or Copper-Alloy Tubing > 1203.8.2 Push-Fit Joints
605.13.7 Water Supply and Distribution, Push-Fit Joints
Push-fit joints shall conform to ASSE 1061 and shall be installed in accordance with the manufacturer's instructions ...
Plumbing Code 2018 of Utah > 6 Water Supply and Distribution > 605 Materials, Joints and Connections > 605.13 Copper Tubing > 605.13.7 Push-Fit Joints
1203.6 Hydronic Piping, Copper or Copper-Alloy Tubing
conforming to Section 1203.6.1, push-fit joints conforming to Section 1203.6.2 or press-connect joints conforming to Section 1203.6.3 ...
Mechanical Code 2018 of Utah > 12 Hydronic Piping > 1203 Joints and Connections > 1203.6 Copper or Copper-Alloy Tubing
1203.14 Hydronic Piping, Raised Temperature Polyethylene (PE-RT) Plastic Tubing
Push-fit joints that create a seal on the outside diameter of the tubing shall not be used with tubing that has an ethylene vinyl alcohol ...
Mechanical Code 2018 of Utah > 12 Hydronic Piping > 1203 Joints and Connections > 1203.14 Raised Temperature Polyethylene (PE-RT) Plastic Tubing